MTB trail grades in the Netherlands: the colour codes

Mountain biking

MTB trail grades in the Netherlands

Dutch MTB trail grades work with four colours: green, blue, red and black. Moreover, this page explains what each colour means, who decides on the grade and how to pick a trail that matches your skills.

Four coloursChoose more safelyPlate below the arrow

Everything about riding a waymarked MTB trail

From colour codes and signs to permits and trail etiquette: five pages to get you started.

Just like a ski slope

Green is easy, blue is intermediate, red is difficult and black is very difficult. This is the same order as in winter sports.

It is about technique

The colour tells you how tricky the paths and obstacles are. Also, it says nothing about how long or tiring the ride is.

Independently assessed

An inspector rides the trail and gives advice. The Dutch cycling union NTFU then sets the grade.

1What is a trail grade?

The Dutch cycling union NTFU developed a grading system for mountain bike trails in the Netherlands, together with trail builder Tracks & Trails and IMBA Europe. An assessed trail gets one colour. Next, that colour tells you how technical the trail is: how narrow the paths are and which obstacles you will meet.

The aim of trail grades is simple. Moreover, you know what to expect before you set off, and you can choose a trail that suits your ability. In addition, that means fewer unpleasant surprises.

2What do green, blue, red and black mean?

ColourLevelWhat to expectWho it suits
GreenEasyMostly wide paths and tracks. No more than 15 per cent singletrack and at most a couple of simple obstacles.Everyone, including beginners.
BlueIntermediateA good share of singletrack. Trees and bushes stand close to the path. Now and then a harder obstacle.Everyone, as long as you match your speed to your skills.
RedDifficultDifficult obstacles on the main line, such as technical descents, high roots, wooden features, jumps, rock gardens and drops.Riders who have mastered all the basic techniques.
BlackVery difficultThe hardest obstacles are on the main line: high jumps and drops and demanding rock gardens.Riders who have mastered every technique very well.

Singletrack is a narrow path where you cannot ride side by side. Source: the guide Bebording van mountainbikeroutes by Tracks & Trails, IMBA Europe and NTFU.

Most trail grades in the Netherlands are green or blue. Red and black trails are rare.

3Does the colour say anything about fitness?

No. Also, the trail grade is only about technique. A long trail with plenty of climbing can still be green. So always check the distance and the metres of ascent as well.

The system applies to mountain bike trails, not to bike parks. And a colour does not mean the same everywhere. A blue trail in the Netherlands is not necessarily as hard as a blue trail in the Alps.

4Where do you see the colour on the trail?

The colour is shown on a narrow plate fixed directly below the trail marker on the post. The plate also carries a symbol and the level in words. That helps if you are colour-blind or do not know the colours yet.

Please note: the colour of the trail marker itself says nothing about difficulty. Next, it is only there to tell trails apart. Moreover, a red marker can belong to a green trail. Read more on the page about MTB trail signs.

A trail has one colour. Sometimes there is a side line with a harder section. In addition, that side line can get its own colour. A blue trail may therefore have a red or black side line. Also, the main line remains the easiest choice.

5Who decides on the grade?

The trail manager does not set the trail grades. An independent inspector rides the trail and assesses it using a fixed form. Based on that advice, the NTFU sets the colour. Next, the grade is valid for five years. After that the trail is assessed again.

The landowner or the group that maintains the trail has to request the assessment. That is why not every trail has a colour yet. To see how a trail comes about, read how an MTB trail is built.

6How do you choose a trail that suits you?

  1. Start one step lowerIs it your first time in an area? Choose green or blue and see how it goes.
  2. Watch for warning signsEven an easy trail can have a tricky section. Moreover, a sign warns you in good time.
  3. Feel free to get offNot sure about an obstacle? In addition, there is no shame in walking. You know your own limits best.
  4. Choose for the least experienced riderRiding in a group? Pick the trail grades that suit the rider with the least experience.

Always wear a helmet, and read the off-road code for mountain bikers too.

7What do you see on the routes on De Fietssite?

Each of the cycle routes on De Fietssite shows one of the trail grades: easy, medium or hard. That is a general estimate. It is not the official NTFU colour code.

Want to know the official colour? Check the information board at the start, the signs along the trail or the website of the trail manager. According to the NTFU, the colour code for each trail is also listed on MTBroutes.nl (in Dutch).

Spotted a mistake in one of our routes? Let us know through the contact page.

Ready to head into the woods?

Find a mountain bike route nearby, check its trail grades and look at the distance, the surface and the starting point.

Choose your language