Seven Mountain Bike Maintenance Rules Every MTBer Needs

Zeven regels voor de MTBer.

Mountain biking is a fantastic way to enjoy nature and stay fit at the same time. However, as with any sport, it pays to look after your kit. For mountain bikers, that mostly means good mountain bike maintenance. Here are seven essential rules that every mountain biker should follow to keep their bike going for years and in top condition.

1. Clean Your Bike after Every Ride

After an intense ride, especially a muddy or wet one, you should clean your bike thoroughly before you put it away. Mud and dirt can build up in the cogs, chain and bearings. In the long run, that causes damage. A handy tip is to carry a garden sprayer filled with water in your car. Then you can wash most of the dirt off your chain, cogs and derailleur right after your ride. At home, you can clean the bike further with a garden hose. However, avoid a pressure washer, because it can damage the bearings.

A clean bike also helps you spot wear or damage in time.

2. Do Not Ride with Worn Parts

It is tempting to do a few more rides with worn brakes or damaged cables, especially if you plan to buy a new bike later in the season. However, this is a big risk. Worn parts can cause serious accidents, especially far from home. So make sure your brakes, cables and other crucial parts are in good condition before you hit the trails.

3. Only Do Maintenance If You Know What You Are Doing

Doing your own mountain bike maintenance can be tempting, but you need to know what you are doing. For example, over-lubricating the chain attracts dirt and water, which can do more damage than it prevents. Tightening bolts and nuts too much can also have serious consequences, especially on a bike with a carbon frame. If you are not sure about your skills, take your bike to a professional.

4. Never Leave Your Bike Unattended and Unsecured

Bike theft is a common problem. Even if you only pop into a shop for a moment, always lock your bike. An unplanned walk home in your sports kit after a ride is no fun. Even when your bike is locked, do not leave it out in the elements for too long. Rain, snow and fog cause corrosion, which leads to rust and damaged parts. Instead, consider storing your bike indoors, for instance by hanging it up with handy hooks.

5. Never Lay Your Bike on the Chain Side

When you stop during a ride and have nothing to lean your bike against, never lay it on the chain and derailleur side. This can bend the drivetrain, and dirt collects in the most important parts. Always choose the other side to prevent damage.

6. Do Not Hang Your Bike Upside Down (If You Have Hydraulic Brakes)

With normal brakes and brake cables, hanging a bike upside down is no problem. However, with Shimano XT, SRAM Guide or other hydraulic brakes, it is not a good idea. If you hang your bike upside down, air can get into the callipers. That can upset the whole braking system. This can be dangerous on your next ride, so avoid this mistake.

7. Keep Your Tyres at the Right Pressure

Riding with tyre pressure that is too low or too high can cause needless damage to your bike. Pressure that is too low can damage your rims or even tear your tyre. Pressure that is too high puts extra stress on the frame and parts. Besides, with high pressure you are more likely to get a puncture from sharp objects. Therefore, always check your tyre pressure before you set off, and adjust it if needed.

Good Mountain Bike Maintenance Pays Off

Mountain biking is a great sport, but it does mean you must look after your bike. If you follow these seven rules, your bike stays in top condition and you can keep enjoying your rides safely. Regular mountain bike maintenance and attention to detail are essential. They extend the life of your bike and prevent unexpected problems.

Choose your language