- Home
- Safety and health
- Safety Warning for Certain Shimano Roller Brakes
Safety Warning for Certain Shimano Roller Brakes

Safety Warning for Shimano Roller Brakes
Shimano warns that a safety problem may exist with some roller brakes. However, in some cases the braking power can fail.
This applies to the following Shimano roller brakes for the rear wheel: BR-C3000-R, BR-C3010-R and BR-C6000-R, fitted to bikes sold after 1 July 2015.
Shimano has found that some rear roller brakes can suddenly lose their braking force.
Incidents
So far, there are no reports of incidents. However, like all Shimano products, these brakes must meet the highest Shimano quality standards. In the interest of consumer safety, Shimano has voluntarily decided to recall these brakes.
The affected roller brakes are fitted to new bikes sold after 1 July 2015, and many different bike brands use them.
The affected brakes have the following production codes: NF, NG, NH, NI, NJ, NK and NL.
The front-wheel brakes are also not part of this recall.
Call to Consumers
Therefore, Shimano asks consumers to check whether their bike has the roller brake in question. If your bike has roller brakes with the type numbers named in this article, please stop using the bike. Then take it straight back to the shop where you bought it.
If you find a white dot on the roller brake, Shimano has already checked and repaired it, so you do not need to contact your dealer.
If in Doubt
If you are not sure whether the roller brake on your bike falls under this recall, contact your dealer.
If your roller brake does fall under the recall, the dealer will fit your bike with a new roller brake free of charge.
Source: Shimano, Product warning